Lucille. Door Hinges. September 03rd , 2017.
Geared continuous hinges are most often found in steel or aluminum. Lighter weight continuous piano hinges are often made of brass. The heavy duty commercial hinges distribute weight and stress along the full length of door and frame, thus preventing misaligned pivot points of individual hinges. Buyers should look for high quality hinges from well-known manufacturers. Cheaper products provide inferior performance and will require repair and replacement long before a higher grade hinge. Companies such as Stanley even provide a limited lifetime warranty on their commercial grade door hinges.
No matter what type of door is being installed, a hinge of some type is necessary. Hinge designs include butt hinges, spring hinges, geared continuous hinges and a myriad of utility hinge designs. Which one you purchase depends on the location and function of the door. A quality hinge provides long-lasting functionality which saves in repair costs and time. Although steel is one of the most common materials for hinges, they can also be manufactured from brass, bronze or aluminum. However, even when the hinge is constructed of brass or bronze, the pins on a high-quality hinge are still manufactured from steel for increased durability. In addition, hinges designed for the heaviest of doors and highest usage typically are only made in steel due to its strength and durability.
Now that you appreciate the invention of door hinges, you need to make sure you have the right ones at work in your home. First, make sure you have enough to do the job that needs to be done on your door. For the most part you will be able to choose between 2 or 3 door hinges on most doors. In some cases the door will come with the set number of hinges. In other cases, you should think about the weight of the door before deciding on the number of hinges that should be used.
If you are replacing three-hole door hinges, you should start by putting in the middle screw first, then put in the bottom screw. Finally you should put in the top screw. If you repeat this on both the top and bottom of a cabinet door you will be able to keep your door in alignment. If you have two-hole door hinges things can get a little trickier. The easiest way to do them is to have someone help you. Their job will be to hold the door in place while you put the screws in. You can also balance the door on something while you put the screws in. But, this can be a little frustrating if the door moves or shifts before you get both screws in place.
You should put the first screw in at this point, at the top of the door. Make sure someone is holding up the weight of the door (or keep it on shims) so the weight doesnt pull that screw out. Close the door and make sure it shuts properly. It should be hitting the strike plate evenly. If not, adjust the shim placement until you have even amounts of space all the way around and the door seems to be evenly set. Immediately put a screw in the bottom door hinges. This will make sure you have the door hinges lined up in a manner that will allow the door to open and close correctly.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does holocaustdenialvideos claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.