Jeanette. Door Hinges. September 27th , 2017.
Unlike the old days when door hinges were made of iron, brass or steel, todays hinges come in an array of materials and finishes. Thanks to modern manufacturing techniques, most of these finishes are maintenance free. Left alone, they wont tarnish, rust or fail over time. What do begin to fail are the screws that hold the door hinges on the door and the frame. The stresses and strains of everyday openings begin to loosen the screws. This is particularly true on heavier doors that are either left open a lot or bear lots of traffic.
You should put the first screw in at this point, at the top of the door. Make sure someone is holding up the weight of the door (or keep it on shims) so the weight doesnt pull that screw out. Close the door and make sure it shuts properly. It should be hitting the strike plate evenly. If not, adjust the shim placement until you have even amounts of space all the way around and the door seems to be evenly set. Immediately put a screw in the bottom door hinges. This will make sure you have the door hinges lined up in a manner that will allow the door to open and close correctly.
Theyre small and inconspicuous, but they really hold a room together. No they are not throw pillows or candles. They are door hinges and they are in every room of your house. From the refrigerator to the cellar door you use them every day. Sure you dont really think about them, but can you imagine what life would be like without them? Your front door might be a large rock or chunk of wood. Or if you are not strong enough to move one of those you would climb a ladder and enter your home through the roof.
For something a little more European, consider adding Antique English Hinges. These H shaped steel cabinet door hinges have a very ornate finish to them that will add old world charm to your kitchen, bathroom or pantry area. Ornamental hinges are another good choice for visible, or surface mounted cabinet door hinges. These come in a wide range of styles, including butterfly and Art Deco. When selecting new hinges, you want to keep a few things in mind. First, whats the style of your kitchen? Is it modern, traditional, country or retro? What kind do you have now and what hinges would not only look good, but also properly support the door so it doesnt sag or even fail over the time. Too weak of hinges and youll always be straightening the door. This can become maddening very quickly.
If you are replacing three-hole door hinges, you should start by putting in the middle screw first, then put in the bottom screw. Finally you should put in the top screw. If you repeat this on both the top and bottom of a cabinet door you will be able to keep your door in alignment. If you have two-hole door hinges things can get a little trickier. The easiest way to do them is to have someone help you. Their job will be to hold the door in place while you put the screws in. You can also balance the door on something while you put the screws in. But, this can be a little frustrating if the door moves or shifts before you get both screws in place.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does holocaustdenialvideos claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.