Jeanette. Door Hinges. October 08th , 2017.
If you have an overlay door you will need pivot hinges. One is attached to the top and the other to the bottom of a door, and portions of each are recessed into the door and frame creating a concealed hinge. Flush doors commonly use butterfly hinges. These hinges are so named because they look like a butterfly when opened. They consist of two flaps with screw holes held together by a pin. They mount on the outside of the door and jamb or frame for a unique decorative look. Youll find them in multiple styles ranging from colonial to art deco and beyond to suit your personal taste.
A room is not a room without a door and door hinges. If there were no hinges you would have either a wall or a hole in the wall. Without door hinges there would never have been the song lyrics nobody knows what happens behind closed doors", because doors couldnt have closed in order for secret things to happen behind them. You must be thinking there had to be something that was used before the shift was made to what we today know as door hinges. You would be right. What was around before hinges was portiers. These were large tapestries that were hanging in front of a big hole in the wall. They would block the entryway to a room and had to be pushed out of the way every time you wanted to go in or out.
When it comes to cabinet door hinges the right ones depend on the type of door you have. Basically there are three types of doors lipped, overlay and flush. The lipped door is one in which a lip has been cut completely around the door. The overlay door is cut larger than the opening so that its edges rest on the door frame. Flush doors sit inside the frame with their faces flush within it. Each type of door dictates different types of hinges. Pivot hinges, one of the most popular styles, are designed for overlay doors. One hinge is mounted on top the other on the bottom with portions of each screwed into the frame resulting in a concealed hinge.
You should put the first screw in at this point, at the top of the door. Make sure someone is holding up the weight of the door (or keep it on shims) so the weight doesnt pull that screw out. Close the door and make sure it shuts properly. It should be hitting the strike plate evenly. If not, adjust the shim placement until you have even amounts of space all the way around and the door seems to be evenly set. Immediately put a screw in the bottom door hinges. This will make sure you have the door hinges lined up in a manner that will allow the door to open and close correctly.
If you have concealed hinges and want to move to surface mounted cabinet hinges, chances are good that youll want to go with either semi-concealed hinges where only the frame wing is visible (the door part goes on the back side of the cabinet door), overlay hinges, or inset hinges. It just depends on the type cabinet doors you have. Before you redo all your hinges buy several different styles and finishes and put them on them in various parts of the kitchen. You can then get a sense of which works best for you from the standpoint of design and décor before going through the effort of replacing all the cabinet door hinges in the home.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does holocaustdenialvideos claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.